Camshaft Sprocket RUNOUT
WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- Put V-block on precise flat bed and support No. 2 and No. 4 journal of camshaft as shown in illustration.
 Courtesy of NISSAN NORTH AMERICA, INC.
|
- Install camshaft sprocket on camshaft.
- Measure camshaft sprocket runout.
| Runout |
: Less than 0.15 mm (0.0059 in) |
- If sprocket runout exceeds the limit, replace camshaft sprocket.