LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Engine Mechanical (Except Hybrid)) >> Removal And Installation >> Camshaft >> Inspection After Removal >> Inspection >> Camshaft End Play

Camshaft End Play

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the camshaft in the cylinder head.
  2. Install dial gauge in thrust direction on front end of camshaft. Measure end play when camshaft is moved forward/backward (in direction to axis) as shown in illustration.
    G04073011Courtesy of NISSAN NORTH AMERICA, INC.
    Standard : 0.115 - 0.188 mm (0.0045 - 0.0074 in)
    Limit : 0.24 mm (0.0094 in)
    • If out of the specified range, replace with new camshaft and measure again.
    • If out of the specified range again, replace with new cylinder head.
scientia non olet · About LEMON Manuals