LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Engine Mechanical (Except Hybrid)) >> Periodic Maintenance >> Drive Belt >> Removal And Installation Of Drive Belt Auto-TENSIONER >> Removal

Removal And Installation Of Drive Belt Auto-TENSIONER: Removal

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the drive belt. Refer to REMOVAL AND INSTALLATION .
  2. Remove the drive belt auto-tensioner.
    CAUTION:

    Do not loosen the drive belt auto-tensioner pulley bolt. (Don't turn it counterclockwise. If turned counterclockwise, the complete drive belt auto-tensioner must be replaced as a unit, including pulley).

scientia non olet · About LEMON Manuals