Function Description
WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- The FEB system uses the ICC sensor to measure the distance to the vehicle ahead in the traveling lane.
- If there is a risk of collision, FEB issues a visual and audible warning signal to the combination meter via CAN communication.
- If the driver does not take action, FEB system applies braking command to ABS actuator and electric unit (control unit).
- If the risk of a collision becomes immanent, FEB system applies braking command to ABS actuator and electric unit (control unit) via CAN communication.
OPERATION CONDITION
- FEB is ON.
- Vehicle speed: approximately 5 km/h (3 mph) and above.
- There is a possibility of a collision with the vehicle ahead.
CAUTION:
It is the driver's responsibility to stay alert, drive safely and be in control of the vehicle at all times. As there is a performance limit, it may not provide a warning or brake in certain conditions.