Work Support
WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
| Work item | Description | Refer to |
|---|---|---|
| REAR TEMP SET CORRECT | Setting change of temperature setting trimmer (rear) can be performed. | TEMPERATURE SETTING TRIMMER (REAR) |
| TEMP SET CORRECT | Setting change of temperature setting trimmer (front) can be performed. | TEMPERATURE SETTING TRIMMER (FRONT) |
| REC MEMORY SET | Setting change of inlet port memory function (REC) can be performed. | INLET PORT MEMORY FUNCTION (REC) |
| FRE MEMORY SET | Setting change of inlet port memory function (FRE) can be performed. | INLET PORT MEMORY FUNCTION (FRE) |
| BLOW SET | Setting change of foot position setting trimmer can be performed. | FOOT POSITION SETTING TRIMMER |
| GAS SENSOR ADJUSTMENT* | Setting change of exhaust gas / outside odor detecting sensor sensitivity adjustment function can be performed. | EXHAUST GAS / OUTSIDE ODOR DETECTING SENSOR SENSITIVITY ADJUSTMENT FUNCTION |
| CLEAN SW SET* | Setting change of auto intake switch interlocking movement change function can be performed. | AUTO INTAKE SWITCH INTERLOCKING MOVEMENT CHANGE FUNCTION |
* : With ACCS (advanced climate control system)
NOTE:
When the battery cable is disconnected from the negative terminal or when the battery voltage becomes 10 V or less, the setting of WORK SUPPORT may be cancelled.