Data Monitor
WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
DISPLAY ITEM LIST
| Monitor item [Unit] | Description | |
|---|---|---|
| AMB TEMP SEN | [°C (°F)] | Ambient sensor value converted from ambient sensor signal received from ambient sensor. |
| IN - VEH TEMP | [°C (°F)] | In - vehicle sensor value converted from in - vehicle sensor signal received from in - vehicle sensor. |
| INT TEMP SEN | [°C (°F)] | Intake sensor value converted from intake sensor signal received from intake sensor. |
| SUNLOAD SEN | [w/m2 ] | Sunload sensor value converted from sunload sensor signal received from sunload sensor. |
| AMB SEN CAL | [°C (°F)] | Ambient temperature value calculated by A/C auto amp. |
| IN - VEH CAL | [°C (°F)] | In - vehicle temperature value calculated by A/C auto amp. |
| INT TEMP CAL | [°C (°F)] | Front evaporator fin temperature value calculated by A/C auto amp. |
| SUNL SEN CAL | [w/m2 ] | Sunload value calculated by A/C auto amp. |
| COMP REQ SIG | [On/Off] | Displays A/C switch ON/OFF status transmitted to other units via CAN communication. |
| FAN REQ SIG | [On/Off] | Displays front blower motor ON/OFF status transmitted to other units via CAN communication. |
| FAN DUTY | Duty ratio of front blower motor judged by A/C auto amp. | |
| XM | Target discharge front air temperature (driver side) judged by A/C auto amp. depending on the temperature setting and the value from each sensor. | |
| RR XM | Target discharge rear air temperature judged by A/C auto amp. depending on the temperature setting and the value from each sensor. | |
| PA TARGET A/TEMP | Target discharge front air temperature (passenger side) judged by A/C auto amp. depending on the temperature setting and the value from each sensor. | |
| RRFAN REQ SIG | [On/Off] | Displays rear blower motor ON/OFF status transmitted to other units via CAN communication. |
| RR FAN DUTY | Duty ratio of rear blower motor judged by A/C auto amp. | |
| ENG COOL TEMP | [°C (°F)] | Engine coolant temperature signal value received from ECM via CAN communication. |
| VEHICLE SPEED | [km/h (mph)] | Vehicle speed signal value received from combination meter via CAN communication. |
| GAS SENSOR DETECT LEVEL | Displays value according to contamination of ambient air. | |
| TRI ZONE XM | Target discharge tri zone air temperature judged by A/C auto amp. depending on the temperature setting and the value from each sensor. | |
| BOOSTER FAN RQST SIGNAL | [On/Off] | Displays rear blower motor ON/OFF status transmitted to other units via CAN communication. |
| BOOSTER FAN DUTY | Duty ratio of rear blower motor judged by A/C auto amp. | |