How To Set
WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
With CONSULT
Perform "REAR TEMP SET CORRECT" of HVAC work support item.
| Work support items | Display (°C) | Display (°F) |
|---|---|---|
| REAR TEMP SET CORRECT | 3.0 | 6 |
| 2.5 | 5 | |
| 2.0 | 4 | |
| 1.5 | 3 | |
| 1.0 | 2 | |
| 0.5 | 1 | |
| 0 (initial status) | 0 (initial status) | |
| - 0.5 | - 1 | |
| - 1.0 | - 2 | |
| - 1.5 | - 3 | |
| - 2.0 | - 4 | |
| - 2.5 | - 5 | |
| - 3.0 | - 6 |
NOTE:
- When - 3.0°C (- 6°F) is corrected on the temperature setting set as 25.0°C (77°F) the temperature controlled by A/C auto amp. is 25.0°C (77°F) - 3.0°C (- 6°F) = 22.0°C (72°F) and the temperature becomes lower than the temperature setting.
- When the battery cable is disconnected from the negative terminal or when the battery voltage becomes 10 V or less, the setting of the difference between the set temperature and control temperature may be cancelled.