Component Inspection (Rear Blower Motor Relay)

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

CHECK REAR BLOWER RELAY

Remove rear blower relay. Refer to TERMINAL ARRANGEMENT .

Check continuity between rear blower relay terminals 3 and 5, then 6 and 7 when voltage is supplied between terminals 1 and 2.

Fig 1: Checking Continuity Between Rear Blower Relay Terminal 3 And 5

Courtesy of NISSAN NORTH AMERICA, INC.

Terminal		Voltage	Continuity
3	5	ON	Yes
3	5	OFF	No
6	7	ON	Yes
6	7	OFF	No

Is the inspection result normal?

YES

Inspection End.

Replace rear blower relay.