Diagnosis Procedure
WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM SELF DIAGNOSTIC
With CONSULT
- Turn ignition switch ON.
- Select "Self Diagnostic Result" mode of "HVAC" using CONSULT.
- Touch "ERASE".
- Turn ignition switch OFF.
- Turn ignition switch ON.
- Perform "DTC CONFIRMATION PROCEDURE". Refer to DTC LOGIC .
Is DTC detected again?
YES
Replace A/C auto amp. Refer to REMOVAL AND INSTALLATION .
NO
Inspection End.