Component Inspection

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

CHECK INTAKE SENSOR

Turn ignition switch OFF.
Disconnect intake sensor connector.

Check resistance between intake sensor terminals.

Terminal		Condition	Resistance: kΩ
Terminal		Temperature: °C (°F)	Resistance: kΩ
1	2	- 15 (5)	17.73
		- 10 (14)	13.46
		- 5 (23)	10.33
		0 (32)	8.00
		5 (41)	6.25
		10 (50)	4.93
		15 (59)	3.92
		20 (68)	3.14
		25 (77)	2.54
		30 (86)	2.06
		35 (95)	1.69
		40 (104)	1.39
		45 (113)	1.15

Is the inspection result normal?

YES

Inspection End.

Replace intake sensor. Refer to REMOVAL AND INSTALLATION .