Component Inspection

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

CHECK IN - VEHICLE SENSOR

Turn ignition switch OFF.
Disconnect in - vehicle sensor connector.

Check resistance between in - vehicle sensor terminals.

Terminal		Condition	Resistance: kΩ
Terminal		Temperature: °C (°F)	Resistance: kΩ
1	2	- 15 (5)	12.73
		- 10 (14)	9.92
		- 5 (23)	7.80
		0 (32)	6.19
		5 (41)	4.95
		10 (50)	3.99
		15 (59)	3.24
		20 (68)	2.65
		25 (77)	2.19
		30 (86)	1.81
		35 (95)	1.51
		40 (104)	1.27
		45 (113)	1.07

Is the inspection result normal?

YES

Inspection End.

Replace in - vehicle sensor. Refer to REMOVAL AND INSTALLATION .