Removal And Installation: Installation

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal.

CAUTION:

Do not reuse the bushings.
Do not reuse the cotter pin.
Do not use a power tool to tighten the wheel hub lock nut.

Clean the mating surface of the wheel hub lock nut and the wheel hub and bearing.
Clean the mating surface of the drive shaft and the wheel hub and bearing.
Align the marks on the disc brake rotor and on the wheel hub and bearing.