Component Inspection
WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK EOP SENSOR
- Turn ignition switch OFF.
- Disconnect EOP sensor harness connector.
- Check resistance between EOP sensor connector terminals.
EOP sensor Condition Resistance
(kΩ)+ - Terminal 1 2 None 4 - 10 3 2 - 8 2 1 4 - 10 3 1 - 3 3 1 2 - 8 2 1 - 3
Is the inspection result normal?
YES
INSPECTION END.
NO
Replace EOP sensor. Refer to COMPONENT PARTS LOCATION .