Diagnostic Test
- CHECK DTC WITH TCM
Check DTC with TCM. Refer to CONSULT FUNCTION .
Is the inspection result normal?
YES
GO TO STEP 2 .
NO
Perform trouble shooting relevant to DTC indicated.
- CHECK DTC WITH ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)
Check DTC with ABS actuator and electric unit (control unit). Refer to CONSULT FUNCTION .
Is the inspection result normal?
YES
GO TO STEP 3 .
NO
Perform trouble shooting relevant to DTC indicated.
- CHECK DTC WITH COMBINATION METER
Check DTC with combination meter. Refer to CONSULT FUNCTION (METER/M&A) .
Is the inspection result normal?
YES
GO TO STEP 4 .
NO
Perform trouble shooting relevant to DTC indicated.
- CHECK OUTPUT SPEED SENSOR
Check output speed sensor. Refer to DIAGNOSIS PROCEDURE .
Is the inspection result normal?
YES
GO TO STEP 5 .
NO
Replace or replace error-detected parts.
- CHECK WHEEL SENSOR
Check wheel sensor. Refer to DIAGNOSIS PROCEDURE (with ICC) or DIAGNOSIS PROCEDURE (without ICC).
Is the inspection result normal?
YES
Check intermittent incident. Refer to INTERMITTENT INCIDENT .
NO
Replace or replace error-detected parts.