Diagnostic Test
WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK ENGINE OIL TEMPERATURE (EOT) SENSOR
- Turn ignition switch OFF.
- Disconnect EOT sensor harness connector.
- Remove EOT sensor. Refer to COMPONENT PARTS LOCATION .
- Check resistance between EOT sensor terminals by heating with hot water as shown in illustration.
Terminals Condition Resistance (kΩ) 1 and 2 Temperature [°C (°F)] 20 (68) 2.37-2.63 50 (122) 0.68-1.00 90 (194) 0.236-0.260
Is the inspection result normal?
YES
GO TO STEP 2 .
NO
Proceed to DIAGNOSIS PROCEDURE .
- CHECK INTERMITTENT INCIDENT
Check intermittent incident. Refer to INTERMITTENT INCIDENT .
Is the inspection result normal?
YES
INSPECTION END
NO
Proceed to DIAGNOSIS PROCEDURE .