Diagnostic Test
WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK CONDENSER-2
- Turn ignition switch OFF.
- Disconnect condenser-2 harness connector.
- Check resistance between condenser-2 terminals as per the following.
| Terminals |
Resistance |
| 1 and 2 |
Above 1 MΩ [at 25°C (77°F)] |
Is the inspection result normal?
YES
INSPECTION END
NO
Replace condenser-2.