LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (Engine Control System (DTC/Circuit Diagnosis) (VQ35DE) (Except Hybrid) (3 Of 3)) >> DTC/Circuit Diagnosis >> DTC P2610: ECM Internal Timer >> Diagnosis Procedure >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK ECM POWER SUPPLY AND GROUND CIRCUIT

    Check ECM power supply and ground circuit. Refer to DIAGNOSIS PROCEDURE .

    Is the inspection result normal?

    YES 

    GO TO STEP 2  .

    NO 

    Repair or replace error-detected parts.

  2. CHECK SELF-DIAGNOSTIC RESULT

    Check that DTCs related to the fuel system and the cooling system are not detected.

    Is the inspection result normal?

    YES 

    Check the DTC. Refer to DTC INDEX .

    NO 

    GO TO STEP 3  .

  3. PERFORM DTC CONFIRMATION PROCEDURE

    1. Erase DTC.
    2. Perform DTC Confirmation Procedure again. Refer to DTC LOGIC .

    Is the 1st trip DTC P2610 displayed again?

    YES 

    Replace ECM. Refer to REMOVAL AND INSTALLATION .

    NO 

    INSPECTION END