Removal And Installation: Removal
WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- Discharge the refrigerant. Refer to RECYCLE REFRIGERANT .
- Remove the front under cover. Refer to REMOVAL AND INSTALLATION .
- Remove the power steering oil pump cover (1).
- Remove the low-pressure flexible hose bolt from the high-pressure and low-pressure pipe.CAUTION:
Cap or wrap the joint of the pipe with suitable material such as vinyl tape to avoid the entry of air.
- Remove the low-pressure flexible hose bolt from the compressor.CAUTION:
Cap or wrap the joint of the pipe with suitable material such as vinyl tape to avoid the entry of air.
- Remove the low-pressure flexible hose.