Exploded View With Torque Specifications

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Final Drive Assembly With Torque Specifications

Courtesy of NISSAN NORTH AMERICA, INC.

1.	Stud bolt	2.	Filler plug	3.	Side oil seal
4.	Final drive assembly	5.	Front oil seal	6.	Wave washer
7.	Electric controlled coupling	8.	Torsional damper	9.	Reamer bolt
10.	Harness bracket	11.	Drain plug
A.	Oil seal lip	B.	Final drive mounting face
: Always replace after every disassembly.
: N•m (kg - m, ft - lb)
: N•m (kg - m, in - lb)
: Apply gear oil.
: Apply Genuine Silicone RTV or equivalent. Refer to RECOMMENDED CHEMICAL PRODUCTS AND SEALANTS .