Component Inspection

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

CHECK TOUCH SENSOR RH

Turn ignition switch OFF.
Disconnect touch sensor RH connector.
Check resistance between touch sensor RH terminals.

Touch sensor RH		Condition		Resistance (Approx.)
Terminal		Condition		Resistance (Approx.)
1	2	Touch sensor RH	Detect obstruction	380 - 420 kΩ
1	2	Touch sensor RH	Other than above	0.95 - 1.05 kΩ

Is the inspection result normal?

YES

Inspection End.

Replace touch sensor RH. Refer to REMOVAL AND INSTALLATION .