LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Door & Lock (DTC/Circuit Diagnosis) (Except Hybrid)) >> DTC/Circuit Diagnosis >> Touch Sensor >> LH >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK TOUCH SENSOR LH

    1. Turn ignition switch OFF.
    2. Disconnect touch sensor LH connector.
    3. Check resistance between touch sensor LH terminals.
    Touch sensor LH Condition Resistance
    (Approx.)
    Terminal
    1 2 Touch sensor LH Detect obstruction 380 - 420 kΩ
    Other than above 0.95 - 1.05 kΩ

    Is the inspection result normal?

    YES 

    Inspection End.

    NO 

    Replace touch sensor LH. Refer to REMOVAL AND INSTALLATION .

scientia non olet · About LEMON Manuals