LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Door & Lock (DTC/Circuit Diagnosis) (Except Hybrid)) >> DTC/Circuit Diagnosis >> Touch Sensor >> LH >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK FUNCTION

    1. Select AUTOMATIC BACK DOOR CONTROL MODULE using CONSULT.
    2. Select TOUCH SEN LH in DATA MONITOR mode.
    3. Check that the function operates normally according to the following conditions.
    Monitor item Condition Status
    TOUCH SEN LH Touch sensor LH Other than below OFF
    Detect obstruction ON

    Is the inspection result normal?

    YES 

    Touch sensor LH is OK.

    NO 

    Refer to DIAGNOSIS PROCEDURE .

scientia non olet · About LEMON Manuals