LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Door & Lock (DTC/Circuit Diagnosis) (Except Hybrid)) >> DTC/Circuit Diagnosis >> Meter Buzzer Circuit >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK COMBINATION METER INPUT SIGNAL

    Select the Data Monitor for the "METER/M&A and check the BUZZER monitor value.

    BUZZER  
    Under the condition of buzzer input : On
    Except above : Off

    Is the inspection result normal?

    YES 

    Replace combination meter. Refer to REMOVAL AND INSTALLATION .

    NO 

    Replace BCM. Refer to REMOVAL AND INSTALLATION .

scientia non olet · About LEMON Manuals