Diagnosis Procedure
WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
Regarding Wiring Diagram information, refer to WIRING DIAGRAM .
- CHECK POWER SUPPLY
- Turn ignition switch OFF.
- Disconnect auto anti-dazzling inside mirror (homelink® universal transceiver) connector.
- Check voltage between auto anti-dazzling inside mirror (homelink® universal transceiver) harness connector and ground.
Auto anti-dazzling inside mirror
(Homelink® universal transceiver) connectorTerminal Condition Voltage (V)
(Approx.)R10 10 Ground Ignition switch position: OFF Battery voltage Ignition switch position: ON 6 Ignition switch position: OFF 0 Ignition switch position: ON Battery voltage Is the inspection result normal?
YES
GO TO STEP 2 .
NO
Check the following items.
- 5A fuse [No. 29 located in the fuse block (J/B)]
- 10A fuse [No. 1 located in the fuse block (J/B)]
- Harness for open or short between fuse and auto anti-dazzling inside mirror (homelink® universal transceiver).
- CHECK GROUND CIRCUIT
Check continuity between auto anti-dazzling inside mirror (homelink® universal transceiver) harness connector and ground.
Auto anti-dazzling inside mirror
(Homelink® universal transceiver) connectorTerminal Ground Continuity R10 8 Yes Is the inspection result normal?
YES
GO TO STEP 3 .
NO
Repair harness.
- CHECK INTERMITTENT INCIDENT
Refer to INTERMITTENT INCIDENT .
Inspection End.