LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Door & Lock (DTC/Circuit Diagnosis) (Except Hybrid)) >> DTC/Circuit Diagnosis >> Hood Switch >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK FUNCTION

    1. Select HOOD SW in Data Monitor mode of IPDM E/R using CONSULT.
    2. Check HOOD SW indication under the following condition.
    Monitor item Condition Indication
    HOOD SW Hood Open ON
    Close OFF

    Is the indication normal?

    YES 

    Hood switch is OK.

    NO 

    Go to DIAGNOSIS PROCEDURE .

scientia non olet · About LEMON Manuals