LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Door & Lock (DTC/Circuit Diagnosis) (Except Hybrid)) >> DTC/Circuit Diagnosis >> Door Lock And Unlock Switch >> Passenger Side >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK FUNCTION

    1. Select DOOR LOCK of BCM using CONSULT.
    2. Select CDL LOCK SW, CDL UNLOCK SW in DATA MONITOR mode.
    3. Check that the function operates normally according to the following conditions.
    Monitor item Condition Status
    CDL LOCK SW Door lock and unlock switch Lock ON
    Unlock OFF
    CDL UNLOCK SW Lock OFF
    Unlock ON

    Is the inspection result normal?

    YES 

    Door lock and unlock switch is OK.

    NO 

    Refer to DIAGNOSIS PROCEDURE .

scientia non olet · About LEMON Manuals