Component Inspection

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

CHECK BACK DOOR SWITCH

Turn ignition switch OFF.
Disconnect back door lock assembly connector.

Check continuity between back door lock assembly terminals.

Back door lock assembly		Condition		Continuity
Terminal		Condition		Continuity
7	8	Back door switch	Pressed	Yes
7	8	Back door switch	Released	No

Is the inspection result normal?

YES

Inspection End.

Replace back door lock assembly. Refer to REMOVAL AND INSTALLATION .