LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Door & Lock (DTC/Circuit Diagnosis) (Except Hybrid)) >> DTC/Circuit Diagnosis >> Back Door Opener Switch >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK FUNCTION

    1. Select TRUNK of BCM using CONSULT.
    2. Select TR/BD OPEN SW in DATA MONITOR mode.
    3. Check that the function operates normally according to the following conditions.
    Monitor item Condition Status
    TR/BD OPEN SW Back door opener switch Pressed ON
    Released OFF

    Is the inspection result normal?

    YES 

    Back door opener switch is OK.

    NO 

    Refer to DIAGNOSIS PROCEDURE .

scientia non olet · About LEMON Manuals