LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Door & Lock (DTC/Circuit Diagnosis) (Except Hybrid)) >> DTC/Circuit Diagnosis >> Automatic Back Door Close Switch >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK AUTOMATIC BACK DOOR CLOSE SWITCH

    1. Turn ignition switch OFF.
    2. Disconnect automatic back door close switch connector.
    3. Check continuity between automatic back door close switch terminals.
    Automatic back door close switch Condition Continuity
    Terminal
    1 2 Automatic back door close switch Pressed Yes
    Released No

    Is the inspection result normal?

    YES 

    Inspection End.

    NO 

    Replace automatic back door close switch. Refer to REMOVAL AND INSTALLATION .

scientia non olet · About LEMON Manuals