LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (Rear Suspension (Except Hybrid)) >> Unit Disassembly And Assembly >> Rear Shock Absorber >> Disassembly And Assembly >> Disassembly

Disassembly And Assembly: Disassembly

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

Do not damage the shock absorber piston rod when removing components from the shock absorber.

  1. Remove the cap from the shock absorber insulator.
  2. Wrap a shop cloth around the lower shock absorber bolt flange. Secure the lower shock absorber bolt flange in a vise.
    CAUTION:

    Do not set the cylindrical part of the rear shock absorber in a vise.

  3. Secure the piston rod tip so that the piston rod does not turn. Remove the piston rod lock nut.
  4. Remove the shock absorber insulator and the bound bumper from the rear shock absorber.
scientia non olet · About LEMON Manuals