Wheel Alignment (Unladen *)
WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
If the vehicle is equipped with the ICC cruise control system and the rear toe has been adjusted during a wheel alignment, the ICC sensor must be aligned. Refer to DESCRIPTION .
| Item | Standard | ||
|---|---|---|---|
| Camber Degree minute (Decimal degree) |
Minimum | -1° 05' (-1.08°) | |
| Nominal | -0° 35' (-0.58°) | ||
| Maximum | -0° 05' (-0.08°) | ||
| Total toe - in | Distance (A - B) | Minimum | Out 0.8 mm (Out 0.031 in) |
| Nominal | In 2.2 mm (In 0.087 in) | ||
| Maximum | In 5.2 mm (In 0.205 in) | ||
| Angle (LH and RH) Degree minute (Decimal degree) |
Minimum | Out 0° 2' 24' (Out 0.04°) | |
| Nominal | In 0° 9' 36' (In 0.16°) | ||
| Maximum | In 0° 21' 36' (In 0.36°) | ||
* : Fuel, engine coolant, and lubricants are full. Spare tire, jack, hand tools, and mats are in designated positions.