LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (Power Window Control System (Except Hybrid)) >> Ecu Diagnosis Information >> Main Power Window And Door Lock/Unlock Switch >> Reference Value >> Physical Values

Physical Values

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

POWER WINDOW MAIN SWITCH

Terminal No.
(wire color)
Description Condition Voltage
(Approx.)
+ - Signal name Input/Output
3
(R)
Ground Encoder power supply Output When ignition switch ON or power window timer operates Battery voltage
4
(Y)
Ground Battery power supply Input - Battery voltage
5
(BR)
Ground Front driver side power window motor DOWN signal Output When front LH switch in
power window main switch is
operated DOWN
Battery voltage
6
(L)
Ground Front driver side power window motor UP signal Output When front LH switch in
power window main switch is
operated UP
Battery voltage
7
(B)
Ground Ground - - 0
91
(BR)
Ground Retained power signal Input IGN SW ON Battery voltage
Within 45 second after ignition switch is turned to OFF Battery voltage
When driver side or passenger side door is opened during retained power operation 0
92
(W)
Ground Retained power signal Input IGN SW ON Battery voltage
Within 45 second after ignition switch is turned to OFF Battery voltage
When driver side or passenger side door is opened during retained power operation 0
10
(LG)
Ground Encoder ground - - 0
11
(V)
Ground Encoder pulse signal 1 Input When power window motor operates
GNSJMKIA0070GB-070Courtesy of NISSAN NORTH AMERICA, INC.
12
(O)
Ground Encoder pulse signal 2 Input When power window motor operates
GNSJMKIA0070GB-070Courtesy of NISSAN NORTH AMERICA, INC.
13
(Y)
Ground Power window serial link Input/Output IGN SW ON or power window timer operating
GNSJPMIA0013GB-013Courtesy of NISSAN NORTH AMERICA, INC.
151
(W)
Ground Door key cylinder switch LOCK signal Input Key position
(Neutral →Locked)
5 → 0
152
(BR)
Ground Door key cylinder switch LOCK signal Input Key position
(Neutral →Locked)
5 → 0
16
(SB)
Ground Door key cylinder switch UNLOCK signal Input Key position
(Neutral →Unlocked)
5 → 0

1 : with automatic drive positioner

2 : without automatic drive positioner