LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (Power Window Control System (Except Hybrid)) >> DTC/Circuit Diagnosis >> Power Window Motor >> Rear RH >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

Regarding Wiring Diagram information, refer to WIRING DIAGRAM .

  1. CHECK REAR POWER WINDOW MOTOR INPUT SIGNAL

    1. Turn ignition switch OFF.
    2. Disconnect rear power window motor RH connector.
    3. Turn ignition switch ON.
    4. Check voltage between rear power window motor RH harness connector and ground.
      (+) (-) Condition Voltage
      (Approx.)
      Rear power window motor RH
      Connector Terminal
      D304 1 Ground Rear power window switch RH UP 0
      DOWN Battery voltage
      2 UP Battery voltage
      DOWN 0

    Is the inspection result normal?

    YES 

    Replace rear power window motor RH. Refer to REMOVAL AND INSTALLATION .

    NO 

    GO TO STEP 2  .

  2. CHECK POWER WINDOW MOTOR CIRCUIT

    1. Turn ignition switch OFF.
    2. Disconnect rear power window switch RH connector.
    3. Check continuity between rear power window switch RH harness connector and rear power window motor RH harness connector.
      Rear power window switch RH Rear power window motor RH Continuity
      Connector Terminal Connector Terminal
      D356 9 D304 1 Yes
      8 2
    4. Check continuity between rear power window switch RH harness connector and ground.
      Rear power window switch RH Ground Continuity
      Connector Terminal
      D356 9 No
      8

    Is the inspection result normal?

    YES 

    Replace rear power window switch RH. Refer to REMOVAL AND INSTALLATION .

    NO 

    Repair or replace harness.

scientia non olet · About LEMON Manuals