LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (Power Window Control System (Except Hybrid)) >> DTC/Circuit Diagnosis >> Door Key Cylinder Switch >> Component Inspection >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK DOOR KEY CYLINDER SWITCH

    1. Turn ignition switch OFF.
    2. Disconnect front door lock assembly LH connector.
    3. Check continuity between front door lock assembly LH terminals.
    Front door lock assembly LH Condition Continuity
    Terminal
    5 4 Driver side door key cylinder Unlock Yes
    Neutral / Lock No
    6 Lock Yes
    Neutral / Unlock No

    Is the inspection result normal?

    YES 

    Inspection End.

    NO 

    Replace front door lock assembly LH. Refer to REMOVAL AND INSTALLATION .