LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 104 (Door & Lock (Introduction, Wiring Diagrams And Basic Inspection) (Except Hybrid)) >> System Description >> System (Automatic Back Door System) >> System Description >> Anti-Pinch Function >> Operation Condition

Operation Condition

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
Detection method Encoder pulse Touch sensor
Applicable operation Open/close operation Close operation
Operation when any trapped foreign material is detected Stop the vehicle Chime sounds (pattern A) and reverse operation
  • Buzzer sounds (pattern A) and the back door stops in the fully-open position after reverse operation
  • During closure (close) operation (at main switch OFF): Closure [open (neutral position return)] operation
Running the vehicle No reverse operation (chime sounds, pattern C)
  • The back door reverses a certain amount, and then it reverses automatically to perform the auto close operation
  • During closure (close) operation (at main switch ON): Closure (open) operation
Non-reverse area
  • Just after starting the motor operation
  • Full range of closure operation
  • Driving
  • Back door open operation
  • Closure [open (return the latch to the neutral position)]
Switch operation during reverse operation Receive
Number of allowable reverse operations Perform the automatic open/close temporary stop function after 2 reverse operations regardless of the operation direction
scientia non olet · About LEMON Manuals