Values On The Diagnosis Tool
WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
CONSULT MONITOR ITEM
| Monitor Item | Condition | Value/Status | |
|---|---|---|---|
| SPINDLE SENSOR LH | Back door: Moving | 0 - 65535 | |
| SPINDLE LH SPEED | Back door: Moving | 0 - 6553.5 | |
| SPINDLE MOTOR LH DUTY | Back door: Moving | 0 - 255 | |
| VHCL SPEED MTR | While driving | Equivalent to speedometer reading | |
| VHCL SPEED ABS | While driving | Equivalent to speedometer reading | |
| MAIN SW | Automatic back door main switch | OFF | OFF |
| ON | ON | ||
| AUTO BD SW | Automatic back door switch | Release | OFF |
| Press | ON | ||
| BK DOOR CL SW | Automatic back door close switch | Release | OFF |
| Press | ON | ||
| PKB SW | Parking brake switch | Release | OFF |
| Press | ON | ||
| BACK DOOR LOCK STATUS | Back door lock | Lock | OFF |
| Unlock | ON | ||
| OPEN SW | Back door | Half latch/fully closed | OFF |
| Open | ON | ||
| CLOSE SW | Back door | Open/half latch | OFF |
| Fully closed | ON | ||
| HALF LATCH SW | Back door | Half latch/fully closed | OFF |
| Open | ON | ||
| TOUCH SEN RH | Touch sensor RH | Other than bellow | OFF |
| Detect obstruction | ON | ||
| TOUCH SEN LH | Touch sensor LH | Other than bellow | OFF |
| Detect obstruction | ON | ||
| P RANGE IND | Selector lever | Other than P position | OFF |
| P position | ON | ||
| RKE REQ | Intelligent Key button (back door) | Release | OFF |
| Press (more than 0.5 second) | MOVE | ||
| Press (just after) | REV | ||
| IGN SW | Ignition switch | Other than ON position | OFF |
| ON position | ON | ||
| SPINDLE LH ENCODER A | Automatic back door | Not operate | No change HI or LO |
| Operate | Change HI or LO | ||
| SPINDLE LH ENCODER B | Automatic back door | Not operate | No change HI or LO |
| Operate | Change HI or LO | ||
| DESTINATION | - | OTHER | |
| AUTO BCK DR POS INITIAL | Calibration of automatic back door position information | Not complete | YET |
| Complete | DONE | ||
| AUTO BCK DR POS LEARN | Additional service when removing battery negative terminal | Not complete | YET |
| Complete | DONE | ||
| SPINDLE SENSOR RH | Back door: Moving | 0 - 65535 | |
| SPINDLE RH SPEED | Back door: Moving | 0 - 6553.5 | |
| SPINDLE MOTOR RH DUTY | Back door: Moving | 0 - 255 | |
| SPINDLE RH ENCODER A | Automatic back door | Not operate | No change HI or LO |
| Operate | Change HI or LO | ||
| SPINDLE RH ENCODER B | Automatic back door | Not operate | No change HI or LO |
| Operate | Change HI or LO | ||