Automatic Back Door Control Unit: FAILSAFE
WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
| Display contents of CONSULT | Fail - safe | Cancellation |
|---|---|---|
| U1000 CAN COMM | Inhibit automatic back door operation | Return to normal status. |
| U1010 CONTROL UNIT (CAN) | Inhibit automatic back door operation | Return to normal status. |
| B2401 IGN OPEN | Inhibit automatic back door operation | Automatic back door control module detects ignition switch ON signal via CAN communication. |
| B2409 HALF LATCH SW | Inhibit automatic back door operation | Automatic back door control module detects that half latch switch changes from ON to OFF when back door fully closes. |
| B2416 TOUCH SEN R OPEN | Inhibit automatic back door operation | Return to normal status. |
| B2417 TOUCH SEN L OPEN | Inhibit automatic back door operation | Return to normal status. |
| B2419 OPEN SW | Inhibit automatic back door operation | Reconnect battery. |
| B2420 CLOSE SW | Inhibit automatic back door operation | Reconnect battery. |
| B2422 BACK DOOR STATE | Inhibit automatic back door operation | Half latch switch is ON from OFF. |
| B2423 ABD MTR TIME OUT | Inhibit automatic back door operation | At least 180 seconds are passed after automatic back door operation is inhibited. |
| B2426 SPINDLE SENSOR LH | Inhibit automatic back door operation | Return to normal status. |
| B2427 SPINDLE SENSOR RH | Inhibit automatic back door operation | Return to normal status. |
| B2428 AUTO BACK DR CNT MODULE | Inhibit automatic back door operation | Return to normal status. |
| B242A CLSR CONDITION | Inhibit automatic back door operation | Reconnect battery. |