Calibration Of Automatic Back Door Position Information: Description

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

When the following work is performed, it is necessary to perform initial setting of automatic back door position information to operate automatic back door system.

After removing and installing or replacing back door assembly
After removing and installing or replacing spindle unit
After adjustment or position change of the back door hinges or striker

NOTE:

If the back door reverses and closes while opening with an automatic/power open operation, it is an indication that re-calibration is needed.