LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Interior Lighting System (Except Hybrid)) >> Removal And Installation >> Step Lamp >> Bulb Or Lens Replacement

Bulb Or Lens Replacement

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

Do not touch the glass surface of a bulb while it is lit or right after being turned OFF to prevent burns.

CAUTION:
  • Do not touch the glass of bulb directly by hand. Keep grease and other oily substances away from bulb surface.
  • Do not leave bulb out of lamp reflector for a long time because dust, moisture, smoke, etc. may affect the performance of lamp.
  1. Remove the step lamp. Refer to REMOVAL AND INSTALLATION .
  2. Grasp the bulb and pull straight out from the step lamp to remove.
  3. Install the step lamp bulb to step lamp.
  4. Install the step lamp. Refer to REMOVAL AND INSTALLATION 
scientia non olet · About LEMON Manuals