LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Interior Lighting System (Except Hybrid)) >> Removal And Installation >> Front Room/Map Lamp >> Bulb Or Lens Replacement

Bulb Or Lens Replacement

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

Do not touch the glass surface of a bulb while it is lit or right after being turned OFF to prevent burns.

CAUTION:
  • Do not touch the glass of bulb directly by hand. Keep grease and other oily substances away from bulb surface.
  • Do not leave bulb out of lamp reflector for a long time because dust, moisture, smoke, etc. may affect the performance of lamp.
  1. Insert a suitable tool into the gap between the lens and the front room/map lamp assembly, then gently release the lens pawls and remove the lens.
  2. Push the bulb inward slightly and twist it counterclockwise to remove from the front room/map lamp assembly.
  3. Push the bulb in and twist clockwise to install.
  4. Install the front room/map lamp lens.
scientia non olet · About LEMON Manuals