LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Interior Lighting System (Except Hybrid)) >> Removal And Installation >> Foot Lamp >> Driver Side >> Bulb Replacement

Bulb Replacement

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

Do not touch the glass surface of a bulb while it is lit or right after being turned OFF to prevent burns.

CAUTION:
  • Do not touch the glass of bulb directly by hand. Keep grease and other oily substances away from bulb surface.
  • Do not leave bulb out of lamp reflector for a long time because dust, moisture, smoke, etc. may affect the performance of lamp.
  1. Remove instrument lower panel LH. Refer to REMOVAL AND INSTALLATION .
  2. Rotate the bulb socket counterclockwise and remove from foot lamp housing.
  3. Grasp the bulb and pull straight out of the bulb socket to remove.
  4. Install foot lamp bulb to bulb socket.
  5. Insert bulb socket into foot lamp housing and rotate clockwise to lock in position.
  6. Install the instrument lower panel LH. Refer to REMOVAL AND INSTALLATION .
scientia non olet · About LEMON Manuals