LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Interior Lighting System (Except Hybrid)) >> Removal And Installation >> Cargo Lamp >> Bulb Or Lens Replacement

Bulb Or Lens Replacement

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

Do not touch the glass surface of a bulb while it is lit or right after being turned OFF to prevent burns.

CAUTION:
  • Do not touch the glass of bulb directly by hand. Keep grease and other oily substances away from bulb surface.
  • Do not leave bulb out of lamp reflector for a long time because dust, moisture, smoke, etc. may affect the performance of lamp.
  • Release and insert pawl as indicated in exploded view or damage may occur.
  1. Beginning at the switch end, insert a suitable tool into the gap between the lens and cargo lamp, then gently release the lens pawls and remove the lens.
  2. Push the tab to release one bulb end, then grasp the bulb and pull out the second end from its socket to remove.
  3. Install cargo lamp bulb to cargo lamp.
  4. Insert pawl at the end opposite the switch first, then insert the remaining two pawls to lock the lens in position.
scientia non olet · About LEMON Manuals