LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Interior Lighting System (Except Hybrid)) >> DTC/Circuit Diagnosis >> Battery Saver Output/Power Supply Circuit >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK BATTERY SAVER OUTPUT/POWER SUPPLY FUNCTION

    G-20 CONSULT

    1. Turn ignition switch ON.
    2. Turn each interior room lamp ON:
      • Front room/map lamp assembly
      • Vanity lamps
      • Personal lamps 2nd row
      • Cargo lamp
    3. Open the driver door to turn ON the following lamps:
      • Front step lamps
      • Foot lamps
      • Front outside handle assembly lamps
    4. Open the back door lock assembly (door ajar switch) to turn ON the following lamp:
      • Automatic back door close switch
    5. Select BATTERY SAVER of BCM (BATTERY SAVER) active test item.
    6. While operating the test item, check that each interior room lamp turns ON/OFF.
      OFF : Interior room lamp OFF
      ON : Interior room lamp ON

    Is the inspection result normal?

    YES 

    Battery saver output/power supply circuit is normal.

    NO 

    Refer to DIAGNOSIS PROCEDURE .

scientia non olet · About LEMON Manuals