Component Description

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

Component	Description
ADAS control unit	Being connected with side radar (LH and RH) via ITS communication, receives vehicle detection signal and transmits Blind Spot Warning/Blind Spot Intervention indicator signal and Blind Spot Warning/Blind Spot Intervention indicator dimmer signal to side radar Receives steering angle sensor signal from steering angle sensor via CAN communication Calculates the approach with the object by the signal from a sensor. Transmits a brake fluid pressure control signal to ABS actuator and electric unit (control unit) via CAN communication. Transmits the buzzer output signal to the sonar control unit via CAN communication. Transmits BCI ON/OFF display signal and BCI system warning lamp signal to combination meter via CAN communication. Transmits a warning buzzer request signal to the driver assistance buzzer control module
Side radar LH/ RH	Being connected with ADAS control unit via ITS communication, transmits vehicle detection signal Receives Blind Spot Intervention indicator signal and Blind Spot Intervention indicator dimmer signal from ADAS control unit and transmits an indicator operation signal to Blind Spot Intervention indicator LH/RH RH side radar equips right/left switching signal circuit for identifying LH or RH because the parts of side radar are common for right and left
Blind Spot Warning/Blind Spot Intervention indicator LH/ RH	Receives Blind Spot Warning/Blind Spot Intervention indicator operation signal from side radar LH/RH and turns OFF, turns ON or blinks
ABS actuator and electric unit (control unit)	Transmits vehicle speed signal to ADAS control unit via CAN communication Receives a brake fluid pressure control signal from the ADAS control unit via CAN communication and controls brake pressure.
BCI OFF switch	Inputs the switch signal to ADAS control unit
Rear sonar sensors (4)	Monitors the near rear surrounding area of the vehicle and transmits the signal to the sonar control unit which passes it to the ADAS control unit for BCI purposes.
Sonar buzzer	Receives buzzer signal from ADAS control unit via sonar control unit and sounds buzzer.
Combination meter (vehicle information display)	Turns the BCI ON/OFF display and BCI system warning lamp according to the signals from the ADAS control unit via CAN communication. Receives BCI ON/OFF display signal and BCI system warning lamp signal via CAN communication.
ECM	Transmits the accelerator pedal position signal, engine speed signal to ADAS control unit via CAN communication
TCM	Transmits the current gear position signal and shift position signal to ADAS control unit via CAN communication
AVM control unit	Receives the various systems and camera signals and routes them to the center display via CAN communication
Display unit	Displays the various system screen signals according to the priority level received via CAN communication
Accelerator pedal actuator	Receives signal from ADAS control unit to push up accelerator via ITS communication.
Driver assistance buzzer control module	Receives warning buzzer request signal to activate warning buzzer Transmits a warning buzzer signal to the warning buzzer
Warning buzzer	When a warning buzzer signal is received from driver assistance buzzer control module, the buzzer sounds