FCW System Settings Cannot Be Turned On/Off In Vehicle Information Display: Description
WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- FCW system setting is not selectable on the navigation screen.NOTE:
When the ignition switch is in ACC position, FCW system settings cannot be changed.
- "Forward Collision Warning" is not indicated on the navigation screen.
- The switching between ON and OFF cannot be performed by operating the navigation system.
- The item of "Forward Collision Warning" on the navigation screen is not active.
- After turning ON the ignition switch or starting the engine, FCW settings of the navigation system cannot be selected for several tens of seconds under the following conditions:
- After replacing AV control unit.
- After erasing connection history of the navigation system.
- After erasing self-diagnosis results of AV control unit.
- The FCW system setting differs from the one set at the previous driving.NOTE:
Turn OFF the ignition switch and wait for 5 seconds or more.