LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 100 (Driver Assistance System (Introduction, Wiring Diagrams And Basic Inspection) (Blind Spot Warning & Blind Spot Intervention) (Except Hybrid)) >> Basic Inspection >> Additional Service When Replacing Lane Camera Unit >> Work Procedure

Work Procedure

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CAMERA AIMING ADJUSTMENT

    Perform the camera aiming adjustment.

    GO TO STEP 2. 

  2. BLIND SPOT WARNING/BLIND SPOT INTERVENTION SYSTEM ACTION TEST

    1. Perform the Blind Spot Warning/Blind Spot Intervention system action test. Refer to WORK PROCEDURE .
    2. Check that the Blind Spot Warning/Blind Spot Intervention system operates normally.

    WORK END

scientia non olet · About LEMON Manuals