LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Wiper & Washer (Except Hybrid)) >> DTC/Circuit Diagnosis >> Rear Wiper Stop Position Signal Circuit >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK REAR WIPER STOP POSITION SIGNAL

    1. Select WIPER of BCM data monitor item.
    2. Operate the rear wiper.
    3. Check that RR WIPER STOP changes to On and Off linked with the wiper operation.
      Monitor item Condition Monitor status
      RR WIPER STOP Rear wiper motor Stop position On
      Except stop position Off

    Is the inspection result normal?

    YES 

    Rear wiper stop position signal circuit is normal.

    NO 

    Refer to DIAGNOSIS PROCEDURE .

scientia non olet · About LEMON Manuals