LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Wiper & Washer (Except Hybrid)) >> DTC/Circuit Diagnosis >> Front Wiper Stop Position Signal Circuit >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK FRONT WIPER STOP POSITION SIGNAL

    1. Select WIP AUTO STOP of IPDM E/R data monitor item.
    2. Operate the front wiper.
    3. With the front wiper operation, check the monitor status.
      Monitor item Condition Monitor status
      WIP AUTO STOP Front wiper motor Stop position STOP P
      Except stop position ACT P

    Is the inspection result normal?

    YES 

    Front wiper stop position signal circuit is normal.

    NO 

    Refer to DIAGNOSIS PROCEDURE .

scientia non olet · About LEMON Manuals