Starting Combination Meter Self-Diagnosis Mode: Notes
WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Check combination meter power supply and ground circuits if self-diagnosis mode does not start. Refer to DIAGNOSIS PROCEDURE . Replace combination meter if power supply and ground circuits are found to be normal and self-diagnosis mode does not start. Refer to REMOVAL AND INSTALLATION .
- Combination meter self-diagnosis mode will function with the ignition switch in ON. Combination meter self-diagnosis mode will exit upon turning the ignition switch to OFF.