LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Meter, Warning Lamp & Indicator (Except Hybrid)) >> Symptom Diagnosis >> The Parking Brake Release Warning Continues Displaying, Or Does Not Display >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK PARKING BRAKE WARNING LAMP OPERATION

    1. Start engine.
    2. Check the operation of the brake warning lamp while operating the parking brake.
    Condition Warning lamp status
    Parking brake applied ON
    Parking brake released OFF

    Is the inspection result normal?

    YES 

    Replace combination meter. Refer to REMOVAL AND INSTALLATION .

    NO 

    GO TO STEP 2. 

  2. CHECK PARKING BRAKE SWITCH SIGNAL CIRCUIT

    1. Turn ignition switch OFF.
    2. Check the parking brake switch signal circuit. Refer to DIAGNOSIS PROCEDURE .

    Is the inspection result normal?

    YES 

    GO TO STEP 3. 

    NO 

    Repair or replace harness or connectors.

  3. CHECK PARKING BRAKE SWITCH UNIT

    Perform a unit check for the parking brake switch. Refer to COMPONENT INSPECTION .

    Is the inspection result normal?

    YES 

    Replace combination meter. Refer to REMOVAL AND INSTALLATION .

    NO 

    Replace parking brake switch. Refer to EXPLODED VIEW .